
DT20
Equipment for cleaning the ducts of chimneys and tubular heat exchangers
It is the ideal tool for chimney sweeps, for the effortless and effective removal of soot and solid particles, which are produced during the combustion of pellets, firewood or coal, thus avoiding chimney fires or carbon monoxide poisoning.
This mechanical brushing equipment with a flexible rotating shaft, has a brush rotation speed controller, is very portable and lightweight, small enough to carry with one hand.
APLICATIONS

CHIMNEYS

HEAT EXCHANGER PIPES

DUCTS
TECHNICAL SPECIFICATIONS
Hydraulic power supply | 230V / 50 - 60Hz 110V / 50 - 60Hz Pressure min. 2 bar Pressure min. 29 psi |
Maximum outlet pressure | 6 bar // 87 psi |
Engine power | 0,37 kW // 0,5 HP |
Engine rotation speed | 0 - 3000 rpm |
Velocidad de trabajo | 0 - 500 rpm |
Connections | Quick connectors |
Noise level | Less than 70 dB |
Direction of rotation | Right / Left |
Control system | Electric |
Control panel | Membrane keyboard |
Dimensions | 436 x 457 x 217 mm
17 x 18 x 8,5 inches |
Weight | 17 kg // 37,48 lb |
Hose length | 15 m // 50 ft / 10m // 33 ft |
Structural material | Stainless steel and HDPE |






OPTIONAL ACCESSORIES

REMOTE CONTROL
for foam injection and low-pressure rinsing.
COD. AC3303605

ROTATING SHAFT of Ø10 mm – 15 m
For brushes from
Ø 30 to 400 mm
COD. AC3303607

ROTATING SHAFT of Ø6 mm – 10 m
For brushes from
Ø12 mm to 20 mm
COD. AC3303606
CONSUMABLES

HEAT EXCHANGER
NYLON BRUSH PACK
Ø 6 mm shaft:
Ø 12, 14, 16, 18
and 20 mm
COD. CP2080034
Ø 10 mm shaft: Ø30, 40, 50, 60, 70 and 80 mm
COD. CP2080037

HEAT EXCHANGER
STEEL BRUSH PACK
Ø 6 mm shaft:
Ø 12, 14, 16, 18 and 20 mm
COD. CP2080036
Ø 10 mm shaft: Ø30, 40, 50, 60, 70 and 80 mm COD. CP2080038

CHIMNEYS
NYLON BRUSH PACK
Ø10 mm shaft:
Ø100, 150, 200, 250, 300 and 400 mm
COD. CP2080039

CHIMNEYS
STEEL BRUSH PACK
Ø 10 mm shaft:
Ø100, 150, 200, 250, 300 y 400 mm
COD. CP2080040